piston alloy
英 [ˈpɪstən ˈælɔɪ]
美 [ˈpɪstən ˈælɔɪ]
网络 活塞铝合金; 活塞合金
双语例句
- Piston is solid aluminum alloy that is strong and lightweight.
活塞是固态铝合金，而且牢固轻便。 - Twin piston alloy callipers at the front and single piston callipers at the rear bring the large-diameter wheels to rest.
前轮是双活塞合金制动钳，而后轮是单活塞制动钳，可对大尺寸车轮进行制动。 - Investigation into Rare-Earth Containing Complex Inoculants for the Piston Ring of Low& Alloy Gray Cast Iron
低合金灰铸铁活塞环稀土复合孕育剂的研究 - When testing the microstructure grade of piston made of Al-Si alloy with eddy current method, the percentage of Si in the alloy, number of inoculum and enviromental temperature would affect the accuracy of grading.
当采用涡流法检测铝硅合金活塞显微组织级别时，合金的含硅量、变质剂的加入量以及温度变化都将影响分级结果的准确性。 - Effect of Iron On the Mechanical Properties of Al-Si Piston Alloy
铁元素对铝硅系活塞合金机械性能的影响 - Study on piston with cooling oil groove by AI alloy extrusion casting
铝合金挤压铸造镶圈内冷活塞的研究 - Review on the Research and Application of Al-Si Piston Alloy at Home and Abroad
国内外铝硅活塞合金的研究及应用述评 - The crown diameter of eutectic Al Si alloy piston has increased suddenly in twice, but the hyper eutectic Al Si alloy piston only once.
共晶铝硅合金活塞顶部直径有两次突然长大，而过共晶铝合金活塞仅有一次。 - The Effect of Squeeze Casting on the Distribution of Silicon in Different Parts of a Piston Made of Hypereutectic Aluminum-Silicon Alloy
挤压铸造对过共晶铝硅合金活塞各部位含硅量分布的影响 - Indirect collision of piston on element and hard rock from bore bottom on element separated alloy from matrix of the efflux element.
活塞及孔底岩石对元件的间接冲击会导致合金与射流元件胎体脱落； - It reviews the optimization measures of Al-Si piston alloy, including kinds, chemical composition, grain refinement, modification, alloying and heat treatment.
评述了铝硅活塞合金的种类，化学成分，晶粒细化，变质处理，合金化和热处理工艺等优化手段。 - The dimension stability of hyper eutectic Al Si alloy piston is higher than that of eutectic Al Si alloy piston.
过共晶铝合金活塞的尺寸稳定性高于共晶铝合金活塞； - This paper summarizes the development and current study status of Al-Si piston alloy.
综述了铝硅活塞合金的发展及研究现状。 - Several types of friction pair with ordinary and bionic structure from material of piston aluminium alloy and cylinder liner cast iron were designed based on the bionic principles and comparative tests of these pairs were done on a friction and wear machine.
根据仿生学原理，利用铝合金活塞和铸铁汽缸套的材料设计了普通结构和几种仿生结构的摩擦副，并在摩擦磨损试验机上进行了对比试验。 - With a purpose of obtaining the nodular cast iron piston ring of high performances, the alloy elements Cu, Nb, Sn, V, Mn are used as additives to satisfy the usage requirements.
为了获得高性能铸态球铁活塞环，采用Cu、Nb、Sn、V、Mn等合金元素作为添加剂，从而满足使用要求。 - Development and Application of Piston Ring of YH-11 Alloy Cast Iron
YH-11合金铸铁活塞环的开发应用 - A Breakage Analysis on the Coarse Crains of Piston Castings Made of Titanium-Bearing Al-Si Alloy
含钛铸造Al-Si合金活塞粗晶断口分析 - At the angle of friction, this paper describes briefly the material requirements of each part of piston and analyzes and describes in particular the merits and demerits, metallographic structure, applied scope, improved techniques of aluminium alloy piston, cast iron piston and steel piston.
从摩擦学的角度出发，简述了活塞各部位材料应满足的要求，并着重对铝合金活塞、铸铁活塞及钢制活塞的优缺点、金相结构、适用范围及工艺改进进行了简要的分析和叙述。 - The reasonable choice of the edge-grinding quality of the PCD cutting tool can meet the requirements of the piston manufacture and get lower edge-grinding cost, and make the PCD cutting tool more widely used in the field of machining Si-Al alloy piston.
合理选择PCD刀具的刃磨质量，既能满足加工要求，又能降低刀具刃磨成本，使PCD刀具在加工硅铝合金领域得到了更广泛的应用。 - The microcrack on the laser hardened piston ring of alloy Cast-iron
激光硬化合金铸铁活塞环的显微裂纹 - Effect of Mechanical Properties on Fe in Rare Earth Hypereutectic Al-Si Piston Alloy
铁对稀土过共晶AL-Si活塞合金机械性能的影响 - Spheroidization of Primary Si in Piston Alloys by a new type of Al-P Master Alloy rod
新型Al-P中间合金对活塞合金中初晶Si的团球化 - High-Temperature Strengthening Effect of Trace RE on Industrial Al-Si Piston Alloy and Its Microstructural Analysis
微量混合RE对Al-Si多元活塞合金的高温强化及组织分析 - However, Ca impurity will poison the P modification efficiency in Al-Si piston alloy. Moreover, it makes the flowability of Al-Si melt worse, and increase inspiratory and shrinkage porosity. The generation of segregation brittle compounds increases the rejection ratio of castings.
钙使Al-Si活塞合金磷变质中毒，且当活塞合金中杂质钙较多时，合金熔体流动性变差，容易吸气和发生微观针孔或缩松，并产生偏析性硬脆化合物使铸件废品率上升。 - The Al-Si alloy piston which modified by lanthanide not only has well room temperature performance, but also increases high temperature of the alloy.
稀土变质处理的Al-Si合金活塞不仅有良好的室温性能，还能提高合金的高温强度。 - Hypereutectic aluminum-silicon alloy which have high wear resistance, low thermal expansion and good conductivity is a perfect piston alloy.
过共晶铝硅合金具有很高的耐磨耐蚀性、优异的低膨胀性能和良好的导热性，是一种理想的活塞用合金材料。 - The hypereutectic Al-Si alloy is widely used in manufacture of automotive engine piston and other parts, but the large primary silicon and the long acicular eutectic silicon exist in the unmodified alloy, which affect the mechanical properties of the alloy greatly.
过共晶Al-Si合金广泛运用于制造汽车发动机活塞等零件，但其组织中存在的粗大多角形块状初晶Si以及大量针片状共晶Si，严重影响了合金的力学性能。 - Al-Si piston alloy has been widely used because of its low density, good high strength, good wear resistance.
Al-Si活塞合金因其具有较低的比密度，良好的高温性能，较好的耐磨性能，而被广泛应用。